Click here to download the full setup file for the Anago KST/ERT Operating and Analysis Software (version 3.5.35). This is the full setup file and if you are using it to upgrade your existing installation you should backup your existing database and then restore it after you have completed the installation process.

Click here to download just the latest executable file for the Anago KST/ERT Operating and Analysis Software (version 3.5.35).  Select “Check Database” from the Tools menu when you first run this update so that it can perform several necessary updates to the database. This file may also include an update to the Language_full.txt file and the dashboard auto upload utility. All files must be saved into the same folder that the Anago KST/ERT Operating and Analysis Software was installed into (usually C:/Program Files(x86)/Anago/KST ). Release notes.

Click here to download the latest Sharpness Dashboard Export Utility. Copy this file into the same folder that the Anago KST/ERT Operating and Analysis Software was installed into (usually C:/Program Files(x86)/Anago/KST ).

Click here to download a new copy of the Anago database. Unzip and copy this database file into the same folder that your existing database has been installed into.

Click here to download the web install for .NET 4. You will need an Internet connection to complete the install when you run this file. This file is only required on Windows XP computers.

Click here to download the database engine, but only if instructed by Anago.

Click here to download the latest drivers for the Anago KST. These work for all USB models of the Anago KST. Alternatively, you can download this zip file to install the 32 bit drivers individually. Use these 64 bit drivers to install the drivers onto a 64 bit computer.

usb-serial adapter

Click here to download the latest firmware for the Anago KST series (v5.03).  This update is for all USB versions in the KST series of sharpness testers. Key enhancements include faster testing, full support for automated wear and sharpness tests as well as a doubling of the analysis resolution. If instructed by Anago, please download this version instead.

Click here to download the latest firmware for the Anago KSTBOT series (v1.22).  This update is for the integrated Anago KST-BOT module that fits onto a robotic sharpening machine.  It will NOT WORK on the standalone Anago KST e series sharpness testers. Click here to download the latest version of the Data Import Applet for the Anago KSTBOT (v1.0).

Click here to download an alternative v4 firmware if you receive the message ‘clamping took too long’ AND you have been instructed to do so by Anago.

Click here to download the latest v3 firmware (only suitable for KSTe Series machines without the auto module)

If in doubt DO NOT DOWNLOAD.

If you do not have the firmware upload program installed please click here to download it. Only update firmware if instructed by Anago support personnel. If you have downloaded the full Software installation file above for version 2.3.34 or higher then you will already have the firmware upload program available on the Start menu in All Programs/Anago/KST.